Project cart is empty
CH-U353RX UHD Video over IP RX
Please sign in so that we can notify you about a reply
This unit is part of a 4K UHD Multi-Function Extension system that allows you to extend HDMI or VGA signals along with KVM using the TCP/ IP protocol over regular Cat.5e/6/7 network cable. This extender supports the transmission of Ultra High-Definition signals (up to 4K@30Hz YUV 4:4:4 or 4K@60Hz YUV 4:2:0) with audio and USB up to 100m on a single cable. The transmission distance can be further extended (up to 100m per segment) by using gigabit network switches, allowing the user to cascade the system without signal loss or introducing delay. CH-U353RX also allows you to send a single AV signal to a large number of Receivers within the same local network. Additionally, that same multicast signal can be used to create large multi-display video walls with amazing simplicity. This system is perfect for both residential and commercial installation environments.
Features
- Video, audio and control transmission over TCP/IP in Unicast (point-to-point) or Multicast (single-to-many) modes
- Support with 0°, 180°, 270° increments rotation
- The analog Line In on the Transmitter sends audio directly to the analog Line Out and is inserted into the HDMI output on connected Receivers
- The Mic In on the Receiver sends audio directly to the analog Line Out on the Transmitter
- Both Tx and Rx may be powered directly by PoE when connected to a Gigabit Ethernet switch that provides PoE (802.3af)
- Supports USB keyboard, mouse and storage extension and IR ,RS-232 bypass
- Unit can be controlled via WebGUI, Telnet, and front panel controls
- Supports Key Control(show me function), can connect key pad through popular RJ-45 connector (key pad is optional)
Brand:
Cypress Technology
Product Type:
UHD Video Over IP RX
Specifications
Maximum Operating Temperature:
+50°C
Number of Channels:
Special Features:
Support with 0°, 180°, 270° Increments Rotation, The Analog Line in on the Transmitter Sends Audio Directly to the Analog Line Out and is Inserted Into the HDMI Output on Connected Receivers, The Mic in on the Receiver Sends Audio Directly to the Analo
IR Frequency:
1kHz
Applications:
Video, Audio, Control Transmission, Point-To-Point, Multicast, IR
Humidity:
20 to 90%
Minimum Operating Temperature:
0°C
Performance
HDMI Compliance Type:
2.0 (DVI 1.0)
HDCP Compliance Type:
2.x
Maximum Audio Level:
2VRMS
Output Signal Type:
4096x2160pixels@30Hz 8bits RGB
Signal-to-Noise Ratio:
80dB
Maximum Resolution:
4096x2160pixels@30Hz
Inputs and Ports
Input Port Type:
1x3.5mm Analog Stereo
Output Port Type:
1xHDMI-Type A, 1xS/PDIF (TOSLINK), 1x3.5mm Analog Stereo
I/O Interface Type:
2xUSB2.0 Type A, 2xUSB1.1 Type A, 1xIR 3.5mm Extender, 1xIR 3.5mm Blaster, 1xRS-232 (3-Pin Terminal Block), 2xControl Button (RJ45)
Input Signal Type:
4096x2160p@30Hz 8bits RGB
Power
Current Rating:
5A
ESD Protection Rating:
±8kV (Air-Gap Discharge), ±4KV (Contact Discharge)
Dimensions
Width:
23.15cm
Depth:
12cm
Height:
2.5cm
Weight:
660g
Other
Voltage Rating:
5V DC
Voltage Rating:
5V DC
Standards Met:
US, EU Standards, CE, FCC Compliance, UL Listed
No reviews found